Test Center evaluates the reliability of ECB with a lifetime of 15 years and storage life up to 25 years.

To do this, accelerated tests for non-failure operation and retentivity (2000 - 5000 hours) are conducted.

Tests are carried out in accordance with the methods of GOST RV, RD, MIL-STD, IEC.

Due to increasing volume of tests for reliability new testing equipment EDA-48 was purchased. It allows you to make tests of the ECB at the same time in 24 slots at a value of temperature from 50 ° C to + 150 ° C.

---

TEST CENTER MAKES ECB TEST FOR RESISTANCE TO SPECIAL factors according to the requirements of GOST RV


INTEGRATED EFFECTS

Tests for the effect of the absorbed dose of electron radiation;
Tests for effect of the absorbed dose of proton radiation;
Tests for the impact of the exposure dose of a nuclear explosion;
Tests for the impact of the exposure dose of nuclear equipment.


PULSE EFFECTS

Tests for impact of the integrated neutron flux;
Tests for impact of the maximum exposure dose.


SINGLE EFFECTS

Tests on the effects of heavy charged particles of space and high-energy protons.


ELECTRO-MAGNETIC PULSE

Tests for the effects of electromagnetic pulse.

---

                                                                               

              Amperage leakage transistor tester after the impact of radiation                                             Equipment for the chip housing opening
                                                                                                                                                                        to make tests for the radiation resistance.

---

Tests for resistance to special influencing factors are made in:
JSC "RRI" Electronstandart "(St. Petersburg);
FGUP NIIP (Lytkarino, Moscow region);
JINR (Dubna, Moscow reg.);
PNPI (Gatchina, Leningrad region.);
VNIIA FSUE (Moscow).

Test Center makes tests the ECB and electronic equipment on the impact of molds. Tests of electronic components and equipment are carried out in accordance with the requirements of GOST RV.

---

                 
             Thermostat room for products aging                                           Mold crops in Petri cups                                                      The product before and after the test,
                                                                                                                                                                                                                              the degree of damage 5 is points.

Test Center makes tests the ECB and electronic equipment on the impact of:

low and high temperature environment (during maintenance, transportation and storage);
environment temperature changes;
Atmospheric condensed precipitation (frost and dew);
high humidity (long and short);
low and high atmospheric pressure; sunlight;
dynamic and static dust (sand);
salt fog;
rain.

Tests of electronic components and equipment are carried out in accordance with the requirements of GOST RV, MIL-STD and IEC publications.

---